Application Download By Telephone (Using Zontalk) - VeriFone Omni 3200 Reference Manual

Table 21 Application Download by Telephone (Using ZONTALK)
Display
1. SYSTEM= (Firmware ID)
2. *ZP=
(and/or)
*ZT=
(and/or)
*ZA=
3. ZONTALK DOWNLOAD
4. PARTIAL OR FULL?
(alternating with)
PART=* FULL=FUNC
Application Downloads
Press [0] to initiate a full or partial application
download over a telephone line connection.
NOTE: If the terminal's CONFIG.SYS file does not
contain values for the *ZP, *ZT, and *ZA variables,
you will be prompted to enter this information in the
next step.
If one or more of the required ZONTALK variables are
missing from the terminal's CONFIG.SYS file, you are
now prompted to enter this information from the core
keypad:
• If *ZP=, key in the download computer's complete
dial-up phone number and press [FUNC/ENTER].
• If *ZT=, key in the terminal ID and press [FUNC/
ENTER].
• If *ZA=, key in the application ID of the program
used by your terminal and press [FUNC/ENTER].
When the terminal confirms that the required *ZP, *ZT,
and *ZA variables are present in the CONFIG.SYS file,
the message ZONTALK DOWNLOAD is displayed
briefly to indicate this fact.
The prompts PARTIAL OR FULL? and PART=*
FULL=FUNC alternate on the terminal display, asking
you to select the type of application download you
want: partial or full:
– To choose a partial download, press [*].
– To choose a full download, press [FUNC/ENTER].
The terminal then attempts to establish the dial-up
telephone connection to the remote download
computer.
Performing Downloads
Action
77