Setup Procedure
Setting Up the Terminal
The following procedure, which consists of seven steps, explains how
to set up and install the Omni 3200 terminal (see Figure 1). It helps
you select a location for the terminal, establish cable and telephone
line connections, and configure optional peripheral devices, if
necessary. Completing this procedure is, in most cases, a necessary
prerequisite to performing the various tasks described in this manual.
Figure 1 Omni 3200 Terminal
Note: This same procedure description is also available to end users
in the Omni 3200 Installation Guide (VeriFone part number 05996).
Setting Up the
Terminal
1