Edit A Keyed File - VeriFone Omni 3200 Reference Manual

Omni 3200 Reference Manual
Table 13 Display Messages and Prompts
Display
2. (All system prompts and messages
stored in firmware are displayed
briefly, one at a time:)
OPTIONS=01
MEMORY ERROR
PROGRAM ERROR
.
.
.
OPTIONS=01
3. SYSTEM= (firmware ID)

[7]: Edit a Keyed File

46
To stop the display sequence at any time, press
[BACKSPACE].
NOTE: Depending on the country version of the
firmware on your terminal, system prompts and
messages may appear in a language other than English.
When the sequence is completed, or if you press
[BACKSPACE], the System Prompt is displayed.
To exit System Mode and restart the terminal
application, press [CLEAR].
Press [7] in System Mode to activate the keyed file editor. You can
then use this editor to add or modify environment variables and
application-specific variables that are stored as keyed records in the
terminal's CONFIG.SYS file. For example, some of the keyed
records commonly stored in CONFIG.SYS include:
*T= Telephone number for remote diagnostics host computer
*ZA= Application ID (for ZONTALK)
*ZP= Host/download computer telephone number (for
ZONTALK)
*ZT= Terminal ID (for ZONTALK)
For more information about the ZONTALK 2000
software, please contact your local VeriFone representative.
User Entry
®
download
[7]: Edit a Keyed File