VeriFone Omni 3200 Reference Manual page 97

Application Downloads
The fact that a terminal-to-terminal upload overwrites all records
stored on the receiving terminal has the following implications:
• You must make sure that application program, and all terminal
settings on the sending terminal, such as the date and time, are the
ones you wish to upload to the receiving terminal.
• When the terminal-to-terminal upload is completed, you must re-
establish the receiving terminal's unique 'identity' by changing
its terminal ID, its System Password, and any other settings or
variables, as required for deployment.
Hardware and Software Requirements
Two mandatory conditions must be met before an application can be
uploaded from one Omni 3200 terminal to another:
• The SRAM size of the receiving terminal must either be the same
size, or larger than, the SRAM size of the sending terminal. For
example, if the sending terminal has a 512 KB SRAM. The
SRAM size of the receiving terminal must be either 512 KB or
1 MB.
To determine the SRAM size of an Omni 3200, enter System
Mode and press the [2] key twice.
• The firmware version ID of the sending and receiving terminals
must be identical. For example, if the sending terminal has the
Omni 3200 firmware version VPQ48AO0, the receiving terminal
must also have version VPQ48AO0.
If one or both of these conditions are not met, an error message will
be displayed when you attempt a terminal-to-terminal application
upload.
Performing Downloads
81