Display Eprom Information - VeriFone Omni 3200 Reference Manual

Omni 3200 Reference Manual
Table 4 Enter System Mode
Display
3. SYSTEM= (Firmware ID)
36
The System Prompt, which is displayed whenever the
terminal enters System Mode, consists of SYSTEM=,
followed by an 8-character firmware version ID, such
as VPQ47AO0.
You can now select from the following local and
remote System Mode functions by pressing the
appropriate key.
NOTE: Each of these functions is described in detail
below. Please read the corresponding procedure
description before you initiate a specific System Mode
operation.
Key System Mode Function
[1]

Display EPROM information

[2] Display Unit ID and SRAM size
[3] Initiate display test
[4] Initiate System Mode diagnostics
[5] Set the date and time
[6] Display messages and prompts
[7] Edit a keyed file (CONFIG.SYS)
[8] Initiate remote diagnostics
[9] Test the thermal printer
[0] Initiate a download by telephone
[ALPHA] Change the System Password
[BACKSPACE] Initiate destructive memory test
[*] Upload software to another terminal
[#] Receive direct software download
[CLEAR] Exit and restart the application
Action
Entering System Mode