F - Get Current Source File Name - VeriFone Omni 3200 Reference Manual

Omni 3200 Reference Manual
F — Get Current Source File Name
120
= Minus sign (–) for negative offset or plus sign (+) for
s
positive offset
aaaaaa = Unassigned memory location offset
= Number of bytes to get (in hexadecimal format)
nn
Command Packet Received by Terminal:
<FFh> <55h> <count> D <rsaaaaaann parameter> <CRC1>
<CRC2>
Response Packet Sent by Terminal:
<FFh> <55h> <count> D <ASCII data of the size requested>
<CRC1> <CRC2>
The F command asks the terminal to send the name of the
application's current source file. The debugging computer can use this
information to refer to the source file stored in the computer's disk
drive.
Command Packet Received by Terminal:
<FFh> <55h> <count> F <CRC1> <CRC2>
Response Packet Sent by Terminal:
<FFh> <55h> <count> F <filename> <CRC1> <CRC2>
Descriptions of Diagnostic and Debugging Commands