Performing A Partial Direct Application Download; Partial Direct Application Download Procedure - VeriFone Omni 3200 Reference Manual

Performing a Partial Direct Application Download

Table 20 Partial Direct Application Download Procedure
Display
1. SYSTEM= (Firmware ID)
2. UNIT RECEIVE
Application Downloads
The procedure described in Table 20 tells you how to perform a
partial direct application download from a host download computer to
an Omni 3200 terminal.
Note: The steps described in the 'Action' column are performed
directly on the Omni 3200 terminal. Notes are also provided in this
column to indicate the actions you must perform on the download
computer.
Press [#] to initiate a direct application download.
When the UNIT RECEIVE prompt is displayed, press
[*] to indicate you want to receive a partial direct
download.
NOTE: When the PARTIAL DOWNLOAD prompt is
displayed (next step), execute the appropriate
ZONTALK, VeriTalk, or Direct Load command on the
download computer to begin the download.
To execute a VeriTalk download:
1. Log in to the VeriTalk user interface.
2. Bring up the Direct Download module.
3. Select 'Operator Initiated'.
4. Select download options.
5. Click the Start button.
NOTE: Detailed user documentation for VeriTalk is
available from VeriFone. For more information about
VeriTalk, please contact your local VeriFone
representative.
Performing Downloads
Action
71