VeriFone Omni 3200 Reference Manual page 23

Step 3: Examine Terminal Features
Figure 6 Omni 3200 Connection Ports
• At the far left of the back panel are two RJ11-type modular jacks
(parallel ports) for connecting the terminal to a telephone line:
The first port is identified by a telephone-shaped
'Telset' icon (shown to the right). You use this Telset
port to connect the Omni 3200 to a telephone base unit.
The second telephone line port is identified by a jack-
shaped 'Telco' icon (shown to the right). You use this
Telco port to connect the Omni 3200 to a telephone
company wall jack.
• Two RJ45-type modular jacks (serial ports) for connecting
optional peripheral devices:
The first serial port is identified by an 'RS232' icon
(shown to the right). You use this port to connect a
VeriFone CR 600 check reader, or other peripheral
device.
The second serial port is identified by 'Bar Code and
PINpad' icons (shown to the right). You use this port to
connect a PINpad, smart card reader/writer, or bar code
wand.
Setting Up the Terminal
7