Appendix A. System Messages - VeriFone Omni 3200 Reference Manual

Appendix A.
System Messages
***BAD RAM***
This error message, which may be displayed during a Destructive
Memory Test, indicates that the terminal's static random access
memory (SRAM) is defective. If you see this message, contract your
local VeriFone representative for assistance.
,*,*,*,*,*,*,*,*,*,*,
This string of commas and asterisks appears when you press the
[BACKSPACE] key during a Telco test using the local System
Diagnostics function in System Mode. (To initiate this test, you press
the [4] key in System Mode.) This character string is displayed when
the Telco function disconnects from the telephone line.
*0,
This character string is displayed when performing a Telco test using
the local System Diagnostics function in System Mode. (To initiate
this test, you press the [4] key in System Mode.) When you have
verified that the DTMF function works properly and press [FUNC/
ENTER], the '*0,' string appears in the top right corner of the display
and the DTMF function is automatically turned off.
OOOOOOOOOOOOOOOO
A string of 16 letter O's is displayed when you press the [ALPHA]
key during a Telco test using the local System Diagnostics function in
System Mode. The string of O's indicates two conditions: 1) the Telco
or Telset connection of the Omni 3200 terminal has been established,
and 2) the dual-tone multiple-frequency (DTMF) function of the
terminal's internal modem is turned on.
A-1