VeriFone Omni 3200 Reference Manual page 161

Appendix A. System Messages
EDIT
This prompt appears when you activate the keyed file editor in
System Mode by pressing the [7] key and then press [BACKSPACE].
You can now enter the name of a keyed file other than CONFIG.SYS,
or you can create a new keyed file. Enter the name of the file and
press [FUNC/ENTER].
EDIT CONFIG.SYS
This prompt appears when you press [7] from within System Mode.
Press [FUNC/ENTER] to activate the keyed file editor to add or
modify records in the terminal's CONFIG.SYS file. Press
[BACKSPACE] to return to the EDIT prompt.
(EMPTY)
This message appears to the right of the key of a keyed file record if
no variable data is stored under that key. For example, *ZT=
(EMPTY). To add a variable to the record, press [BACKSPACE] to
delete the (EMPTY) prompt, type in the desired information, and
press [FUNC/ENTER]. If you do not want to add any information,
press [CLEAR] to return to the System Prompt. The keyed record
remains "empty."
--EXEC ERROR nn
This error message indicates that an unexpected application program
error occurred. Download the application program again. If the error
message persists, contact your local VeriFone representative for
assistance.
FATAL MEMORY ERR
This error message indicates an error occurred in the terminal's
volatile RAM. Download the application program again. If the error
message persists, contact your local VeriFone representative for
assistance.
FILE ERROR
This error message indicates that the CONFIG.SYS or another other
file in the terminal memory has been corrupted. Create a new
CONFIG.SYS file, or download the application program again to
your terminal to re-initialize the application memory.
A-5