Connect A Pinpad - VeriFone Omni 3200 Reference Manual

Connect a PINpad

Step 5: Connect Optional Device(s)
To connect a PINpad to the Omni 3200 terminal (see Figure 9 and
Figure 10):
1. If necessary, insert the small modular plug on one end of the
PINpad cable into the modular jack on the PINpad.
2. If you are installing a PINpad 101, PINpad 201, or PINpad 1000,
position and insert the grommet to secure the cable connection.
3. Insert the larger RJ45-type connector on the other end of the
PINpad cable into the 'Bar Code/PINpad' serial port on the back
panel of the Omni 3200 terminal.
Figure 9 PINpad 101/102/1000 Connection
Figure 10 PINpad 201/301/2000 Connection
Setting Up the Terminal
11