VeriFone Omni 3200 Reference Manual page 99

Table 22 Terminal-to-Terminal Application Upload
Display
2a. Receiving terminal:
UNIT RECEIVE
(then)
FFFFFF
(Memory block address)
3a. Sending terminal:
DOWNLOAD DONE CP
(or)
DOWNLOAD FAILED
3b. Receiving terminal:
DOWNLOAD DONE CP
(or)
DOWNLOAD FAILED
4a. Sending terminal:
SYSTEM= (Firmware ID)
4b. Receiving terminal:
SYSTEM= (Firmware ID)
Application Downloads
The UNIT RECEIVE prompt is displayed on the
receiving terminal until the upload begins.
The same continuously updating hexadecimal value is
also displayed on the receiving terminal to indicate the
address of the memory block current being received.
When the upload is successfully completed, the
DOWNLOAD DONE CP message is displayed on
the sending terminal, indicating that the clock value (C)
and the System Password (P) were modified on the
receiving terminal.
NOTE: If the message DOWNLOAD FAILED is
displayed on either terminal, check the cable
connection and try again. If the problem persists,
contact your local VeriFone representative for
assistance.
When the upload is successfully received, the
DOWNLOAD DONE CP message is displayed on
the receiving terminal, indicating that its clock value
(C) and the System Password (P) were modified by the
upload.
If the download is successful, the sending terminal
automatically returns to the System Prompt. To exit
System Mode, press [CLEAR].
If the download is successful, press [CLEAR] on the
receiving terminal to return to the System Prompt.
Press [CLEAR] again to exit System Mode and start the
application program.
Performing Downloads
Action
83