Performing An Application Download By Telephone; Preparing The Download Computer - VeriFone Omni 3200 Reference Manual

Omni 3200 Reference Manual

Performing an Application Download by Telephone

74
The procedure described in Table 21 below tells you how to perform a
full or partial application download by telephone from a remote host
download computer running ZONTALK software to an Omni 3200
terminal.
Note: For details about the setup requirements and download
procedures for VeriTalk, please refer to the VeriTalk Enterprise
System 1.3 User's Guide, VeriFone Part Number 52077-02.
Before you can initiate an application download by telephone,
specific setup and configuration requirements must be met on both
sides of the remote data transfer.

Preparing the Download Computer

For the remote download computer, these requirements are as
follows:
• The download computer must be running the ZONTALK (or
VeriTalk) download program,
• The ZONTALK (or VeriTalk) software must be correctly
configured for the download by telephone,
• The application program (full or partial) that is to be downloaded
must be resident in the download computer's file system,
• The download computer must have direct access to a dial-up
telephone line over a modem connection, and
• The download computer must be ready to communicate over a
telephone connection with the remote Omni 3200 terminal which
initiates the download.
Application Downloads