Performing A Full Direct Application Download - VeriFone Omni 3200 Reference Manual

Performing a Full Direct Application Download

Table 19 Full Direct Application Download Procedure
Display
1. SYSTEM= (Firmware ID)
2. UNIT RECEIVE
----------
*---------
**--------
***-------
****------
(. . .)
**********
Application Downloads
The procedure described in Table 19 tells you how to perform a full
direct application download from a host download computer to an
Omni 3200 terminal.
Note: The steps described in the 'Action' column are performed
directly on the Omni 3200 terminal. Notes are also provided in this
column to indicate actions you must perform on the download
computer side of the data transfer.
Press [#] to initiate a direct application download.
NOTE: When the UNIT RECEIVE prompt is
displayed (next step), execute the appropriate
ZONTALK, VeriTalk, or Direct Load command on the
download computer to begin the download.
The UNIT RECEIVE prompt is displayed on the
terminal until the download begins.
The terminal displays the progress of the download.
Each asterisk (*) displayed represents 10% of the
application being transferred. When the display shows
ten asterisks, the download is complete.
NOTE: To stop the application download at any time,
press [CLEAR]. The download procedure ends and the
terminal returns to the System Prompt.
Performing Downloads
Action
69