Display Messages And Prompts - VeriFone Omni 3200 Reference Manual

Table 12 Set Date and Time
Display
4. Ww YYMMDD HHMMSS

[6]: Display Messages and Prompts

Table 13 Display Messages and Prompts
Display
1. SYSTEM= (Firmware ID)

[6]: Display Messages and Prompts

The terminal displays the day of the week (Ww)
followed by the date and time. (The current time is
continuously updated by the calendar/clock chip.)
NOTE: The days of the week are displayed with initial
capital letters as Su, Mo, Tu, We, Th, Fr, and Sa.
To return to the SYSTEM= prompt, press [CLEAR].
To exit System Mode and restart the terminal
application, press [CLEAR] again.
If you press the [6] key in System Mode, all of the system prompts
and error messages that are part of the current firmware version are
displayed in sequence. When all messages have been displayed one
time, the sequence ends and the System Prompt is re-displayed.
Note: This feature is for information only and is not a test function.
To stop the display sequence at any time, press [BACKSPACE].
Press [6] to briefly display all system prompts and error
messages in sequence.
NOTE: Because over 50 system messages and prompts
are stored in firmware, it takes several minutes for the
complete display sequence to end. (Each message is
displayed for approximately one second.)
Performing System Mode Operations
Action
User Entry
45