VeriFone Omni 3200 Reference Manual page 118

Omni 3200 Reference Manual
Table 25 Terminal-to-Terminal Operating System Upload
Display
6a. Sending terminal:
DOWNLOAD DONE
(or)
DOWNLOAD FAILED
6b. Receiving terminal:
DOWNLOAD DONE
(or)
DOWNLOAD FAILED
7a. Sending terminal:
SYSTEM= (Firmware ID)
7b. Receiving terminal:
SYSTEM= (Firmware ID)
8. Receiving terminal:
DOWNLOAD NEEDED
102
When the upload is complete, the message
DOWNLOAD DONE is displayed and the sending
terminal returns automatically to the System Prompt.
If you see the prompt DOWNLOAD FAILED, press
[CLEAR], check all cable connections and repeat the
procedure.
NOTE: If you continue to have problems with the
operating system download, contact your local
VeriFone representative for assistance.
When the download is complete, the message
DOWNLOAD DONE is displayed. The new operating
system on the receiving terminal starts executing
automatically and the System Prompt is displayed.
If you see the prompt DOWNLOAD FAILED, press
[CLEAR], check all cable connections and repeat the
procedure.
At the end of a successful operating terminal-to-
terminal operating system download, the System
Prompt is displayed.
While the sending terminal is still in System Mode, you
can proceed to execute a direct application download.
At the end of a successful terminal-to-terminal
operating system download, the System Prompt is
displayed.
NOTE: The Omni 3200 firmware version ID (the
8-character value in VPQXXYYZ format) that is
displayed as part of the System Prompt on the receiving
terminal should now be identical to the firmware ID of
the sending terminal.
At at the System Prompt, press [CLEAR] to exit
System Mode.
When you exit System Mode on the receiving terminal,
the message DOWNLOAD NEEDED is displayed,
indicating that you must now download an application.
(The operating system upload erased the existing
application software.)
Action
Operating System Downloads