Setting Up the Download Environment
To connect the cable link between the sending download computer
and the receiving Omni 3200 terminal:
1. Disconnect the power source from both systems.
2. Connect the DIN-type connector on one end of the cable to the
COM1 (or COM2) serial I/O port on the download computer.
3. Connect the RJ45-type connector on the other end of the
download cable to the 'RS232' port on the back panel of the
Omni 3200 terminal.
4. Connect the power to the download computer and terminal.
Figure 17 Direct Download Cable Connection
Performing Downloads
65