Table of Contents
Advertisement
T
S
ERMINAL
ETUP
VX 520 Setup
Using the Smart
Card Reader
To conduct a smart
card transaction
CAUTION
Using the Magnetic
Card Reader
To conduct a credit or
debit card transaction
38
VX 520 I
NSTALLATION
The smart card transaction procedure may vary from one application to another.
Verify the procedure with your application provider before performing a smart card
transaction.
1
Position a smart card with the contacts facing upward (see
2
Insert the smart card into the smart card reader slot in a smooth, continuous
motion until it seats firmly.
3
Remove the card only when the application indicates the transaction is
complete.
Figure 32
Inserting a Smart Card
Leave the smart card in the card reader until the transaction is complete.
Premature card removal will invalidate the transaction.
The VX 520 terminal supports credit or debit card transactions.
1
Position a magnetic card with the stripe in the card reader and facing inward,
toward the keypad.
2
To ensure a proper read of the magnetic swipe card, the user should insert the
magnetic card from the top of the unit, as shown in
3
Swipe the card through the magnetic card reader.
Figure 33
Using the Magnetic Card Reader
G
UIDE
Figure
32).
Figure
33.
Advertisement
Table of Contents
