[*]: Initiate Upload To Another Terminal; [#]: Receive Direct Download - VeriFone Omni 3200 Reference Manual

Omni 3200 Reference Manual

[*]: Initiate Upload to Another Terminal

[#]: Receive Direct Download

56
In System Mode, press [*] to upload the application program stored in
the memory of one Omni 3200 terminal into the memory of another
Omni 3200 terminal.
Note: The term "upload" is used to denote the transfer of data
between two devices (terminals) of similar size, as opposed to a
"download," which is the transfer of data from a larger device (host
computer) to a smaller device (terminal).
The terminal that is uploading the application is called the 'sending
terminal.' The other terminal is called the 'receiving terminal.'
To perform the data transfer, the sending terminal uses the [*] System
Mode function (Initiate upload) and the receiving terminal uses the
[#] function (Receive download).
Note: For detailed information and about performing terminal-to-
terminal uploads, refer to the section, "Performing Downloads."
In System Mode, press [#] to receive a direct software download from
a download computer or from another Omni 3200 terminal.
A direct software download can be 'full' or 'partial.' In a direct
download, as opposed to a download by telephone, the receiving
Omni 3200 terminal must be connected to the download computer, or
to another Omni 3200 terminal, by a cable. In addition, the download
computer must be running the ZONTALK or VeriTalk application.
Note: For detailed information about receiving a direct download,
please refer to the section, "Performing Downloads."
[*]: Initiate Upload to Another Terminal