VeriFone Omni 3200 Reference Manual page 164

Omni 3200 Reference Manual
A-8
NO ETX
This message appears during a card reader test if the terminal cannot
detect an ETX (End of Text) character in the data on a magnetic card.
If this occurs, try again with a different card. If the message persists,
contact your local VeriFone representative for assistance.
NO LINE
This message indicates that no active phone line was connected to the
terminal's modem (Telco or Telset port) when the terminal attempted
to dial a remote ZONTALK or VeriTalk download computer. Check
the telephone line connection.
NO STX
This message is displayed during a card reader test in System Mode if
the terminal cannot detect an STX (Start of Text) character in the data
on a magnetic card. If this occurs, try the test again with a different
card. If the message persists, contact your local VeriFone
representative for assistance.
NO SUCH FILE
This message appears when you enter the name of a keyed file in
response to the EDIT prompt, and the file does not exist. Press
[FUNC/ENTER] to create the file and go to the RECALL? prompt.
Or, press [CLEAR] to return to the System Prompt.
OLD?
The terminal is requesting you to enter the current System Password
which you want to modify. Key in the current password and press
[FUNC/ENTER].
PART=* FULL=FUNC
When this blinking prompt is displayed during an application
download, press [*] if you want a partial download or press [FUNC/
ENTER] if you want a full application download.