VeriFone Omni 3200 Reference Manual page 105

Table 23 Direct Operating System Download
Display
4. SYSTEM=
(then)
(Bootloader version ID)
(then)
OPSYS NEEDED
ENTER * / 0 / #
(then)
ERASING FLASH
5. UNIT RECEIVE
----------
*---------
**--------
***-------
****------
(. . .)
**********
6. DOWNLOAD DONE
(or)
DOWNLOAD FAILED
Operating System Downloads
If you select the [1] option in Step 3, the terminal's
bootloader firmware executes and you see the
SYSTEM= message, followed by the bootloader
version ID (for example, VPZ06AO0).
After a few seconds, the OPSYS NEEDED prompt is
displayed giving you three procedure options.
To initiate the direct operating system download, press
the [#] key.
The ERASING FLASH message appears to indicate
that the flash EPROM of the terminal is being erased as
the first step of the operating system download
procedure.
NOTE: At this point, you cannot interrupt the
download procedure from terminal and key presses will
have no effect until the download is completed.
The terminal is now ready to receive the operating
system download. The UNIT RECEIVE prompt
continues to be displayed on the terminal until you
execute the appropriate 'Start' command on the
download computer.
The terminal then displays the progress of the
download. Each asterisk (*) displayed represents 10%
of the operating system software being transferred.
When the display shows ten asterisks, the download is
complete.
When the download is complete, the message
DOWNLOAD DONE is displayed. The new operating
system should then restart itself automatically and
display the System Prompt.
If you see the prompt DOWNLOAD FAILED, press
[CLEAR], check all cable connections and repeat the
procedure.
NOTE: If you continue to have problems with the
operating system download, contact your local
VeriFone representative for assistance.
Performing Downloads
Action
89