Connect Optional Device(S); 5Xx Optional Device Connections - VeriFone omni 5 series Installation Manual

Connect
Optional
Device(s)
CAUTION
NOTE
x
V 5xx Optional
Device Connections
6
Replace the MSAM compartment door and reinstall the screw (see
Figure 13 Closing MSAM Compartment Door
x x
The V 5xx/V 6xx supports some peripheral devices designed for use with
electronic point-of-sale terminals.
Before connecting any peripheral device, remove the power cord from the bottom
of the terminal and ensure that the green indicator LED is not lit. Reconnect the
power cord only after you are finished connecting the peripheral device(s). For
complete information about peripheral installation and use, refer to the user
documentation supplied with those devices.
For more information about optional devices, please contact your VeriFone
distributor.
RS-232-type devices do not work on the PINpad port. PINpad-type devices do not
work on the RS-232 port. If an optional peripheral device does not function
correctly, check the port connection.
x
For the V 5xx, use the two ports on the back panel to connect up to two optional
devices.
Connecting the PINpad or Smart Card Reader to the V
Use the following procedure to connect a PINpad or smart card reader.
1
Insert the RJ45-type connector on the end of the PINpad or smart card reader
into the port on the back of the peripheral device.
To install a PINpad 101, PINpad 201, or PINpad 1000, position and insert the
grommet to secure the cable connection.
If a cable is not already connected to the smart card reader or PINpad, insert
the small modular plug on one end of the interface cable into the optional
device's modular jack.
T
ERMINAL

Connect Optional Device(s)

Figure
x
5xx
X X
V 5 /V 6 I G
XX XX NSTALLATION
S
ETUP
13).
21
UIDE