Connect Optional Device(S) - VeriFone Omni 5 series Installation Manual

4
Remove any previously installed MSAM card by sliding the card from the
MSAM cardholder.
5
Install an MSAM card by aligning the card and carefully sliding it within the
guides on the cover until it is fully inserted (see
Figure 10
Before inserting the MSAM card, position it as shown in
NOTE
gold contacts facing the smart car reader end of the terminal. The cardholder
connector base has a set of contacts and a notch on one corner to ensure the
MSAM card is positioned correctly. The MSAM card has a notch on one corner to
ensure that it fits into the connector base in only one way. The MSAM
compartment door will not close properly if the MSAM card(s) are installed
incorrectly.
6
Replace the MSAM compartment door and reinstall the screw (see
Figure 11
Connect The Omni 5xxx supports some peripheral devices designed for use with electronic
Optional point-of-sale terminals.
Device(s)
Installing An MSAM Card
Closing MSAM Compartment Door
T
ERMINAL

Connect Optional Device(s)

Figure 10).
Figure 10, with the card's
Figure
O 5 I
MNI XXX NSTALLATION
S
ETUP
11).
19
G
UIDE