Adjustment Program Basic Operations - Epson Stylus Pro 7400 Service Manual

EPSON Stylus Pro 7400/7800/9400/9800

5.1.7 Adjustment Program Basic Operations

This section describes the basic operations of the Adjustment Program.
The Adjustment Program includes some adjustment items which
C A U T I O N
should not be performed at on-site service. Be sure not to perform
any adjustments that are not described in this manual at on-site
service.
System Requirements
OS: Windows 98SE, Me, 2000, XP
Interface: USB
The printer driver and EPW3 must have been installed.
Startup
1. Double-click on "adjwiz2.exe" to start the Adjustment Program.
2. A startup screen will appear. Select the printer name and the port.
Printer Name (and the port)
Stylus Pro 7400, Stylus Pro 7800, Stylus Pro 9400, Stylus Pro 9800
Mode
Select the mode between the sequential and individual modes.
3. Click the [Start] button.
Figure 5-1. Adjustment Program Startup Screen
Adjustment
Sequential mode
By selecting a part you replaced or repaired, this mode guides you to perform all
the required adjustments in a predetermined sequence.
1. Highlight the part you replaced or repaired in the left box and click the [Add]
button.
2. Click the [OK] button.
Figure 5-2. Sequential Mode
Individual mode
This mode allows you to select and perform an adjustment individually.
1. Highlight the target adjustment item and click the [OK] button.
Figure 5-3. Individual Mode
Overview
Revision B
300