Epson Stylus Pro 7400 Service Manual page 17

EPSON Stylus Pro 7400/7800/9400/9800
1.2.4.3 Selectable Paper Size
The following paper sizes can be selected in the driver for Roll paper/cut sheet.
Table 1-9. Selectable Paper Size
Paper Size Size (W x H)
Letter 8 1/2 x 11 in
US B 11 x 17 in 11 x 17 in
US B 17 x 24 in 17 x 24 in
US C 17 x 22 in 17 x 22 in
US D 22 x 34 in 22 x 34 in
US E 34 x 44 in 34 x 44 in
A4 210 x 297 mm
A3 297 x 420 mm
Super A3 / B 329 x 483 mm
A2 420 x 59 4mm
A1 594 x 841 mm
Super A1 24 x 36 in
A0 841 mm x 1,189 mm
Super A0 914 mm x 1,292 mm
B5 182 x 257 mm
Note : The sizes in bold type are for the Stylus Pro 9400/9800.
Note "*1": Basically, load cut sheet on the printer in portrait orientation. And the paper grain
direction should run vertically for best result.
"*2": When using media other than paper loading it in landscape orientation, the allowable
media thickness is 3.15 to 59 mil (0.08 to 1.5 mm).
"*3": The printer does not support this sized media. Note that the sizes given in the table
are printable area sizes, not media sizes.
Product Description
*
Paper Size Size (W x H)
B4 257 x 364 mm
B3 364 x 514 mm
B2 515mm x 728mm
B1 728 mm x 1,030 mm
B1 (Landscape) 728 mm x 1,030 mm
* 2
B0 1,030 mm x 1,456 mm
Super B0 1,118 mm x 1,580 mm
30 x 24 in 30 x 24 in
3.5 x 4.5 in* 3 3.5 x 4.5 in
8 x 10 in 8 x 10 in
11 x 14 in 11 x 14 in
16 x 20 in 16 x 20 in
60 x 90 cm 60 x 90 cm
40 x 60 cm 40 x 60 cm
30 x 40 cm 30 x 40 cm
Basic Specifications
1
Revision B
17