Epson Stylus Pro 7400 Service Manual page 76

EPSON Stylus Pro 7400/7800/9400/9800
Note "*1": Available space in the Maintenance Tank is indicated as shown below.
100 to 81%
80 to 61%
60 to 41%
40 to 21%
20 to 10%
Less than 10%
0% (Maintenance tank full)
"*2": Remaining lives of the cutter, CR motor, PF motor, Head unit, Cleaning unit and
Pressure motor are indicated as shown below.
100 to 81%
80 to 61%
60 to 41%
40 to 21%
20 to 1%
Less than 1%
"*3": Remaining amount of ink is indicated as shown below.
100 to 81%
80 to 61%
60 to 41%
40 to 21%
20% ~ just before near end
After near end ~ just before ink end nn%
0% (ink end)
"*4": The ink cartridge information is displayed based on the information stored in the
CSIC of the ink cartridge.
Product Description
E∗∗∗∗∗F
E∗∗∗∗ F
E∗∗∗ F
E∗∗ F
E∗ F
nn%
0%
E∗∗∗∗∗F
E∗∗∗∗ F
E∗∗∗ F
E∗∗ F
E∗ F
F F
E∗∗∗∗∗F
E∗∗∗∗ F
E∗∗∗ F
E∗∗ F
E∗ F
0%
1.4.4.20 Printing Job Information
A job history report (up to 10 jobs) stored on the printer can be printed using the "Job
Information" in the TEST PRINT menu.
The "job" includes the following operations;
A print job sent by a host computer
Printing an adjustment pattern
(includes Gap Adjustment, Nozzle Check, Cutter Adjustment, and Paper
Thickness patterns)
Printing a Status Sheet or Job Information
The following two items are required to print the Job Information. For more
information, see "1.4.3 Job Information
Print paper size: A4
Font:
NOTE • 2-byte characters in user name and document name is "?".
• "-" is printed if the corresponding value does not exits.
• "?" is printed if the corresponding value is unknown.
Control Panel
(p.48)".
Built-in font (Print all in alphanumeric characters)
Revision B
76