Epson Stylus Pro 7400 Service Manual page 257

EPSON Stylus Pro 7400/7800/9400/9800
9. Remove the three screws that secure the PF MOTOR ASSY. and remove it.
Figure 4-87.
Three C.P.S.(S-P2) M4 x 8 screws
Reinstall the PF MOTOR ASSY. so that the harness outlet of the
assy. faces toward the rear side of the printer.
Whenever the PF MOTOR ASSY. is reinstalled or replaced, the
A D J U S T M E N T
R E Q U I R E D
corresponding adjustment must be carried out.
page 292.
Disassembly & Assembly
See
See Figure 4-87.
See Chapter 5 on
Disassembly Procedure
C.P.S.(S-P2) 4x8
PF MOTOR ASSY.
Harness Outlet
Figure 4-87. Removing the PF MOTOR ASSY.
Revision B
257