EPSON Stylus Pro 7400/7800/9400/9800
4.2.3.2 H TOP COVER ASSY.
1.
Open the FRONT COVER ASSY.
2.
Remove the four screws that secure the H TOP COVER ASSY.
Four C.B.S.(O) M4 x 8 screws
3.
Slide the H TOP COVER ASSY. toward the front side and then lift it to remove it.
Put the left and right edges of the H TOP COVER ASSY. on the
edge each of the L SIDE COVER ASSY. and the R SIDE COVER
ASSY.
L SIDE COVER
ASSY.
Figure 4-18. Reinstalling the H TOP COVER ASSY.
Disassembly & Assembly
R SIDE COVER
ASSY.
Edge
Edge
Disassembly Procedure
C.B.S.(O) 4x8
3-2
3-1
H TOP COVER ASSY.
C.B.S.(O) 4x8
Figure 4-19. Removing the H TOP COVER ASSY.
Revision B
C.B.S.(O) 4x8
C.B.S.(O) 4x8
221