Epson Stylus Pro 7400 Service Manual page 359

EPSON Stylus Pro 7400/7800/9400/9800
9. Click the [Print] button to print the Bi-D adjustment pattern for color ink
( ). (The pattern is printed in VSD1, VSD2, and VSD3 modes, so three
8
patterns are printed at a time.)
10. Examine the printout patterns for each of the three modes, and select the value
for the group of most closely aligned blocks for each mode. Then enter the
values into the edit boxes (
9
The printed pattern is changed 2 steps, but you can input in 1-step
C H E C K
P O I N T
unit.
11. Click the [Write] button (
10
completed, click the [OK] button (
12. Click the [Finish] button (
12
Figure 5-90. [Manual Bi-D Adjustment] Screen (2)
Adjustment
).
) to write the input values. When the writing is
).
11
).
8
9
10
12
11
Figure 5-91. Adjustment Patterns (Color)
Advanced Adjustment
Revision B
359