Epson Stylus Pro 7400 Service Manual page 49

EPSON Stylus Pro 7400/7800/9400/9800
Job Information
The job information (68 bytes x 10 jobs) is stored on the NVRAM on the main
board and can be checked by JOB INFORMATION in the panel setting menu. The
information includes the following items.
Table 1-35. Job Information
Parameter Information
xx1 The Quantity of
Saved Job
Information
xx2 Saving No.
xx3, xx4 ID No.
xx5 Using I/F
xx6 Job Status
xx7~xx8 Character String
Code
xx9~xx24 User name (16 byte) In case of less than maximum length, fill
xx25~xx56 Document name
(32byte)
xx57~xx72 Host name
xx73 Media ID
xx74 Impression value
xx75~xx90 Ink used
xx91~xx94 Paper Used
xx95~xx100 Print Start Tim
xx101~xx106 Time Used for Print YYMMDDhhmmss, Time of JE (Time of
xx107 Ink set information
xx108 Paper path
xx109~xx110 Page number
Product Description
Remarks
0 to 10
0 to 9
1 to 65535 (0 not used.)
01 to 05 (Parallel* / USB / OptionIF1 / OptionIF2*
/ IEEE1394) * 1
FF: not use
01 to 05 (Pending / Printing / Complete / Cancel /
Abort)
Currently reserved as 00h 00h fixed.
<SP>(20h).
*2
Saves 16-byte out of 32-byte sent from the driver
Media ID specified by the driver
01-02, the value is 2 when DP=ON is specified in
the job.
[xxx.xx ml] Reply in the order of ink cartridge
alignment
H:xxxx mm W:xxxx mm
YYMMDDhhmmss, Time of JS
Complete/Cancel/Abort)
Same as IK
Same as PP
---
Note "*1": Currently reserved as 00h 00h fixed.
"*2": As the printer is not equipped with a parallel I/F, 01h is reserved.
NOTE: The saving values for each item when printing internal adjustment
patterns are as shown below.
Table 1-36. Job Information for Adjustment Pattern Printings
Pattern Type
Nozzle Check Pattern Print
Status Print
Job Information Print
User Paper Setting Print
Bi-D Adjustment
Uni-D Adjustment
Paper Thickness Detection
Cutter Position Adjustment
Control Panel
Character User
Use I/F
Code Name
FFh 00h Printer Nozzle Check
FFh 00h Printer Status Sheet
FFh 00h Printer Job Information
FFh 00h Printer Custom Paper
FFh 00h Printer Head Alignment
FFh 00h Printer Head Alignment
FFh 00h Printer Detect Paper Thickness
FFh 00h Printer Cutter Position
Revision B
Document Name
49