EPSON Stylus Pro 7400/7800/9400/9800
4.2.3.9 FRONT COVER ASSY.
1.
Open the FRONT COVER ASSY.
2.
Remove the four screws that secure the FRONT COVER ASSY. and remove it
together with the two Reinforcing Hinges.
Four C.C.S. M4 x 10 screws
Make sure that the FRONT COVER, HINGE, L/R and the FRONT
COVER SPRING L/R are in the statuses shown in the figure below,
and then install the FRONT COVER ASSY.
Right Side of the Printer
FRONT COVER
SPRING L
Left Side of the Printer
FRONT COVER
SPRING R
Figure 4-33. Checking the FRONT COVER, HINGE and FRONT
Disassembly & Assembly
FRONT COVER,
HINGE, L
FRONT COVER,
HINGE, R
COVER SPRING
Disassembly Procedure
FRONT COVER ASSY.
C.C.S. 4x10
Reinforcing Hinge
Figure 4-34. Removing the FRONT COVER ASSY.
Revision B
C.C.S. 4x10
Reinforcing Hinge
230