Epson Stylus Pro 7400 Notice Sheet

About installing the printer software
In the Installing the Printer Software section of the Setup Guide, the step "Select Local or Network." is
not necessary. Skip step 5 (For Windows) or step 6 (For Mac OS 9.x and Mac OS X).
About paper margin
In the Control Panel and Product Information section of the Reference Guide, the supported paper margins
are incorrect. The correct paper margins should be DEFAULT, T/B 15 mm,
T/B 25 mm, 15 mm, and 3 mm.
Margin settings
DEFAULT
T/B 15 mm
T/B 25 mm
15 mm
3 mm
The following table shows the default paper margin for the paper.
Roll Paper
Plain Paper
Singleweight Matte Paper
Enhanced Matte Paper
Premium Semimatte Photo Paper (250)
Premium Luster Photo Paper (250)
Photo Paper Gloss 250
Photo Glossy Paper
Photo Semigloss Paper
Textured Fine Art Paper
UltraSmooth Fine Art Paper
Proofing Paper Semimatte
Premium Glossy Photo Paper (250)
Premium Semigloss Photo Paper (250)
Note:
When you set the margin once, the margin applies to all media. To change the paper margin, select the target
margin setting again.
Try T/B 25 mm when smear may result in the top and bottom areas.
When you select the paper margin setting except DEFAULT, the following number appears on the right
side of the paper mark on the printer's control panel.
Margin settings
T/B 15 mm
T/B 25 mm
15 mm
3 mm
NOTICE SHEET
Top Bottom
See the list below.
15 mm 15 mm
25 mm 25 mm
15 mm 15 mm
3 mm 3 mm
Top/Bottom
15 mm
20 mm
Number
1
2
1
0
Copyright © 2005 Seiko Epson Corporation. All rights reserved.
Printed in Japan 05. xx-xx
Left/Right
3 mm
3 mm
3 mm
15 mm
3 mm
Left/Right
3 mm
3 mm