Epson Stylus Pro 7400 Service Manual page 288

EPSON Stylus Pro 7400/7800/9400/9800
4.2.7.6 BOX ASSY., FLUSHING (R, L)
When removing the BOX ASSY., FLUSHING (R/L), ink may leak
C A U T I O N
out of the Waste Ink Tubes and the Ink Exhaust. Have a waste cloth
beforehand to wipe out the leaked ink.
BOX ASSY., FLUSHING (R)
1. Remove the R SIDE COVER ASSY.
When performing the next step, be careful not to damage the
C A U T I O N
SCALE, CR.
2. Remove the 2 screws that secure the BOX ASSY., FLUSHING (R).
Two C.P.S.(S-P2) M3 x 8 screws
3. Pull out the TUBE, INK, WASTE; R from the Ink Exhaust through the two holes
of the frame, and remove the BOX ASSY., FLUSHING (R).
When reinstalling the TUBE, INK, WASTE; R, make sure to insert
C A U T I O N
it correctly into the waste ink outlet and route the tubes as shown in
the figure right, or ink may leak.
Disassembly & Assembly
See Section 4.2.3.4 on page 223.
Disassembly Procedure
Right Front of the Printer
SCALE, CR
C.P.S.(S-P2) 3x8
Figure 4-142. Removing the BOX ASSY., FLUSHING (R)
Revision B
Right Rear of the Printer
TUBE, INK,
WASTE; R
Holes
Ink Exhaust
BOX ASSY.,
FLUSHING (R)
288