Epson Stylus Pro 7400 Service Manual page 78

EPSON Stylus Pro 7400/7800/9400/9800
1.4.4.21 Printing Custom Paper Information
User-defined paper settings stored on the printer using the CUSTOM PAPER menu
can be printed out by executing the "Custom Paper" in the TEST PRINT menu.
The following two items are required to print the Custom Paper information.
Print paper size: A4
Font: Built-in font (Print all in alphanumeric characters)
NOTE: "?" is printed out for the settings made by two-byte characters.
Product Description
Paper No.1
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard
Cut Method : ThickPaperFast M/W Adj.
Ppr Thick. : 0.2mm
Paper No.2
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard
Cut Method : ThickPaperFast M/W Adj.
Ppr Thick. : 0.2mm
Paper No.3
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard
Cut Method : ThickPaperFast M/W Adj.
Ppr Thick. : 0.2mm
Paper No.4
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard
Cut Method : ThickPaperFast M/W Adj.
Ppr Thick. : 0.2mm
Paper No.5
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard
Cut Method : ThickPaperFast M/W Adj.
Ppr Thick. : 0.2mm
Paper No.6
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard
Cut Method : ThickPaperFast M/W Adj.
Ppr Thick. : 0.2mm
Paper No.7
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard
Cut Method : ThickPaperFast M/W Adj.
Ppr Thick. : 0.2mm
Paper No.8
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard
Cut Method : ThickPaperFast M/W Adj.
Ppr Thick. : 0.2mm
Paper No.9
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard
Cut Method : ThickPaperFast M/W Adj.
Ppr Thick. : 0.2mm
Paper No.10
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard
Cut Method : ThickPaperFast M/W Adj.
Ppr Thick. : 0.2mm
Figure 1-21. Custom Paper Information
Control Panel
Drying Time : 10.0 sec Suction : Standard
: Standard
Ppr Feed Adj. : -0.70 %
Drying Time : 10.0 sec Suction : Standard
: Standard
Ppr Feed Adj. : -0.70 %
Drying Time : 10.0 sec Suction : Standard
: Standard
Ppr Feed Adj. : -0.70 %
Drying Time : 10.0 sec Suction : Standard
: Standard
Ppr Feed Adj. : -0.70 %
Drying Time : 10.0 sec Suction : Standard
: Standard
Ppr Feed Adj. : -0.70 %
Drying Time : 10.0 sec Suction : Standard
: Standard
Ppr Feed Adj. : -0.70 %
Drying Time : 10.0 sec Suction : Standard
: Standard
Ppr Feed Adj. : -0.70 %
Drying Time : 10.0 sec Suction : Standard
: Standard
Ppr Feed Adj. : -0.70 %
Drying Time : 10.0 sec Suction : Standard
: Standard
Ppr Feed Adj. : -0.70 %
Drying Time : 10.0 sec Suction : Standard
: Standard
Ppr Feed Adj. : -0.70 %
Revision B
78