EPSON Stylus Pro 7400/7800/9400/9800
7.
Tilt the MAIN TUBE HOLDER frontward and pull out the CR BELT from the
retainer of the CARRIAGE ASSY.
Whenever the CR BELT is reinstalled or replaced, the
A D J U S T M E N T
R E Q U I R E D
corresponding adjustment must be carried out.
page 292.
Disassembly & Assembly
See Chapter 5 on
Disassembly Procedure
Retainer
Figure 4-57. Removing the CR BELT (3)
Revision B
242