EPSON Stylus Pro 7400/7800/9400/9800
The COVER, MIST may come off the frame after removing the
C A U T I O N
BOX ASSY., FLUSHING (R). If the COVER, MIST come off,
reattach them on the frame matching up their holes with the three
tabs and one guide pin as shown in the figure below.
COVER, MIST
Guide Pin
Figure 4-143. Reattaching the COVER, MIST
Disassembly & Assembly
Set the two guide pins of the BOX ASSY., FLUSHING (R) in the
positioning holes on the frame.
Tabs
Whenever the BOX ASSY., FLUSHING (R) is replaced, the
A D J U S T M E N T
R E Q U I R E D
corresponding adjustment must be carried out.
page 292.
Disassembly Procedure
Guide Pins
Figure 4-144. Reinstalling the BOX ASSY., FLUSHING (R)
Revision B
See Chapter 5 on
289