EPSON Stylus Pro 7400/7800/9400/9800
5.
Slide the ROLL TOP COVER leftward and remove the UNDULATE WASHER
and the DAMPER DISK.
See Figure 4-31.
Be sure to reattach the UNDULATE WASHER and the
C A U T I O N
DAMPER DISK in the correct order.
DAMPER DISK
Figure 4-30. Reinstalling the UNDULATE WASHER and
When performing the next step, be careful not to damage the
ROLL TOP COVER.
The next step is not required for the Stylus Pro 7400/7800 as they do
C H E C K
P O I N T
not have the break pins.
6.
Press the ROLL TOP COVER to the left side to release its right end from the right
break pin, and remove the ROLL TOP COVER releasing its left end from the left
break pin.
See Figure 4-32.
Disassembly & Assembly
UNDULATE WASHER
DAMPER DISK
DAMPER DISK
ROLL TOP COVER
5-1
Figure 4-31. Removing the UNDULATE WASHER and DAMPER DISK
Left Break Pin
Figure 4-32. Removing the ROLL TOP COVER
Disassembly Procedure
5-2
6-1
6-3
Revision B
UNDULATE WASHER
Right Break Pin
6-2
229