Basic Operations - Epson Stylus Pro 7400 Service Manual

EPSON Stylus Pro 7400/7800/9400/9800

4.2.1 Basic Operations

4.2.1.1 Protective metal plate
1. Open the FRONT COVER ASSY.
2. Remove the screw that secures the protective metal plate on the left side of the
CARRIAGE ASSY. and remove the plate.
One protective screw
3. Close the FRONT COVER ASSY.
When the printer should be repacked for transportation, be sure to
screw the protective metal plate to the CARRIAGE ASSY. and use
protection materials.
The disassembly procedures on the following pages are described
C H E C K
P O I N T
on the assumption that the protective metal plate has already been
removed.
Disassembly & Assembly
FRONT COVER ASSY.
Figure 4-3. Removing the Protective metal plate
Disassembly Procedure
Protective Metal Plate
Revision B
CARRIAGE ASSY.
Protective Screw
214