Epson Stylus Pro 7400 Service Manual page 277

EPSON Stylus Pro 7400/7800/9400/9800
10. Remove the four screws that secure the HOLDER ASSY., IC, RIGHT.
Four C.C.S. M4 x 8 screws
When performing the next step, be careful not to pull the HOLDER
C A U T I O N
ASSY., IC, RIGHT too much as it is still connected to the printer
with the TUBE, SUPPLY INK.
11. Release the hooked tab that secures the HOLDER ASSY., IC, RIGHT, and
remove it.
Make sure to insert the two tabs of the HOLDER ASSY., IC,
RIGHT into the two slots.
Tabs
Figure 4-122. Reinstalling the HOLDER ASSY., IC, RIGHT
Disassembly & Assembly
Figure 4-123. Removing the HOLDER ASSY., IC, RIGHT (1)
Disassembly Procedure
C.C.S. 4x8
11-2
C.C.S. 4x8
Revision B
11-1
Hooked tab
277