Epson Stylus Pro 7400 Service Manual page 268

EPSON Stylus Pro 7400/7800/9400/9800
6. Put the left retaining hook of the Damper Unit on the hole on the left bottom of the
CR COVER ASSY. to hang the Unit on the Assy.
7. Loosen the right screw and remove the left screw that secure the HEAD FIXING
PLATE. See Figure 4-105.
Two C.P.S.(S-P2) M3 x 6 screws
8. Release the HEAD FIXING PLATE from the tab and slide the right side of the
Plate toward you. See Figure 4-105.
Disassembly & Assembly
See Figure 4-104.
Disassembly Procedure
CR COVER ASSY.
Figure 4-104. Hanging the Damper Unit
Remove the C.P.S.(S-P2) M3x6 screw
Tab
HEAD FIXING PLATE
Figure 4-105. Releasing the HEAD FIXING PLATE
Revision B
Hole
Retaining Hook
Loosen the C.P.S. (S-P2) M3x6 screw
268