Adjustment Program Basic Operations - Epson 3800 - Stylus Pro Color Inkjet Printer Service Manual

EPSON Stylus Pro 3800/3800C/3850

5.1.7 Adjustment Program Basic Operations

This section describes the basic operations of the Adjustment Program.
† System Requirements
„
OS: Windows 2000, XP
„
Interface: USB
„
The printer driver must have been installed.
ADJUSTMENT
† Startup
When you start the Adjustment program for this printer, the NVRAM Backup
Utility will automatically start up. Unless carrying out parameter writing, execute
parameter reading before carrying out the adjustments. For operation of the
NVRAM Backup Utility, see "5.3.6 Parameter Backup"
1. Double-click on "adjwiz2.exe", to start the NVRAM Backup Utility.
2. See "5.3.6 Parameter Backup"
complete the NVRAM Backup Utility.
3. The startup screen of the Adjustment Program appears. Select whether to
carry out the adjustments in Sequential Mode or Individual Mode.
4. Click [Start].
Figure 5-1. Adjustment Program Startup Screen
Overview
Revision A
(Page 212).
(Page 212) to execute parameter backup, and
196