Epson Stylus Pro 7400 Service Manual page 226

EPSON Stylus Pro 7400/7800/9400/9800
3. Open the ROLL TOP COVER.
4. Remove the 14 screws that secure the COVER, REAR.
Ten C.B.S. M4 x 6 screw
One C.B.S. M3 x 6 screw
One C.B. M3 x 6 screw
Two hex socket screws
The Stylus Pro 7400/7800 use ten screws to secure the COVER,
C H E C K
P O I N T REAR.
Six C.B.S. M4 x 6 screws
One C.B.S. M3 x 6 screw
One C.B. M3 x 6 screw
Two hex socket screws
5. Close the ROLL TOP COVER.
6. Release the COVER, REAR from the two guide pins and remove the COVER,
REAR.
Disassembly & Assembly
COVER, REAR
6
C.B. 3x6
C.B.S. 4x6
Hex socket screw
Figure 4-26. Removing the COVER, REAR
Disassembly Procedure
3
6
C.B.S. 3x6
Revision B
5
Guide
Pins
226