Epson Stylus Pro 7400 Service Manual page 264

EPSON Stylus Pro 7400/7800/9400/9800
8. Remove the screw that secures the IM Sensor and remove it.
One C.P.P. M1.4 x 5 screw
Put the protrusion of the IM Sensor into the hole located under the
tab.
Tab
Figure 4-98. Reinstalling the IM Sensor
9. Disconnect the FFC from the connector.
Whenever the IM Sensor is reinstalled or replaced, the
A D J U S T M E N T
R E Q U I R E D
corresponding adjustment must be carried out.
page 292.
Disassembly & Assembly
Protrusion
See Chapter 5 on
Connector
Disassembly Procedure
FFC
IM (Ink Mark) Sensor
C.P.P. M1.4x5
Figure 4-99. Removing the IM Sensor
Revision B
264