Epson Stylus Pro 7400 Service Manual page 274

EPSON Stylus Pro 7400/7800/9400/9800
Beware of the following items when performing the next step.
C A U T I O N
Never touch the film part of the VALVE ASSY., HEAD; C.
Be careful not to damage or deform the joint part of the
VALVE ASSY., HEAD; C to be connected to the TUBE,
SUPPLY, INK.
Film part
(the opposite side
also has the film.)
Figure 4-116. Handling the VALVE ASSY., HEAD; C
5. Remove the eight VALVE ASSY., HEAD; C from the COVER, DUMPER.
Whenever the VALVE ASSY., HEAD; C is reinstalled or replaced,
A D J U S T M E N T
R E Q U I R E D
the corresponding adjustment must be carried out.
page 292.
Disassembly & Assembly
Joint part
See Chapter 5 on
Disassembly Procedure
COVER, DUMPER
Figure 4-117. Removing the VALVE ASSY., HEAD; C
Revision B
VALVE ASSY., HEAD; C
274