Epson Stylus Pro 7400 Service Manual page 46

EPSON Stylus Pro 7400/7800/9400/9800
1.4.2.2 Icons on the LCD
Paper Source
An icon corresponds to the selected media type (roll or cut sheet) is displayed.
Table 1-29. Paper Source Icon
Paper type
Roll paper auto cut ON
Roll paper auto cut OFF
Cut sheet
Custom Paper No.
The user-defined paper setting number created by the CUSTOM PAPER function in
the panel setting menu is displayed. See
information on the CUSTOM PAPER.
Table 1-30. User Paper Setting No. Icon
User Paper
Setting No.
1
2
9
10
Product Description
LCD
"1.4.4.31 Custom Paper" (p.87) for more
LCD
Platen Gap Setting
The platen gap setting made by the PLATEN GAP function in the panel setting menu
is indicated. It does not appear when using the CUSTOM PAPER setting.
Table 1-31. Platen Gap Location Setting Icon
Platen Gap Location Setting
Roll Paper Margin
Margin setting for roll paper is indicated. It does not appear when the setting is default.
Table 1-32. Roll Paper Margin Icon
Platen Gap Location Setting
TOP/BOTTOM 15mm
TOP 35mm /BOTTOM 15mm
Roll Paper Counter
The remaining amount of the roll paper is indicated. This icon appears when REMAINING
PPR SETUP in the Maintenance mode has been set to ROLL and the Roll Paper Counter
setting has been made.
Roll paper counter icon:
Control Panel
LCD
Widest
Wider
Wide
Narrow
LCD
3mm
15mm
Revision B
46