Epson Stylus Pro 7400 Service Manual page 64

EPSON Stylus Pro 7400/7800/9400/9800
1.4.4.5 Page Lines
This menu allows you to print or not print a page lines (cutoff lines). The page line, a
black solid line with 1 dot width, cannot be printed on cut sheet media (only for roll
paper). This setting, however, is ignored when a print job is made by the printer driver
(printer driver settings has the priority). If the paper width setting of the printer driver
is narrower than that of roll paper loaded on the printer, a vertical page line is printed
on the paper as the right edge of the paper size specified by the driver.
The page line is printed in the same resolution with the image.
NOTE: The vertical page line is not printed when the print job is sent without
specifying the paper size (horizontal page lines can be printed.)
Page Line menu
PRINTER SETUP
PLATEN GAP
PAGE LINE
INTERFACE
Product Description
PAGE LINE
ON
Setting
OFF
PAGE LINE
ON
Setting
OFF
1.4.4.6 Interface
This menu allows you to switch the interface setting between auto-detection, USB,
IEEE1394, and optional interface.
Interface menu
PRINTER SETUP
PAGE LINE
INTERFACE
CODE PAGE
Control Panel
Revision B
INTERFACE
AUTO
Setting
USB
IEEE1394
INTERFACE
AUTO
Setting
USB
IEEE1394
INTERFACE
USB
Setting
IEEE1394
OPTION I/F CARD
INTERFACE
USB
Setting
IEEE1394
OPTION I/F CARD
64