Panel Setting - Epson Stylus Pro 7400 Service Manual

EPSON Stylus Pro 7400/7800/9400/9800

1.4.4 Panel Setting

1.4.4.1 Outline
Entering the Panel Setting Mode
The printer can go into the Panel Setting mode by the [Menu
in "Ready" status, and even when a warning error, Paper Out error, or ink cartridge
error (except the cartridge destination error) is occurring. Printing operation is
disabled while the printer is in the mode.
Using the Panel Setting Menu
1. When the [Menu ] button is pressed under the condition described above,
the top menu of the Panel Setting menu is displayed.
2. Use the [Paper Feed ( ) ] buttons to select (highlight) the menu item.
When a target item is highlighted, press the [Menu
menu screen of the selected item.
3. Select an item in the menu screen using the [Paper Feed
press theÇš[Menu ] button. A list of selectable settings is displayed.
4. A setting displayed with * (asterisk) is the current setting. Use the [Paper Feed
( ) ] buttons to change the setting.
5. After highlighting your choice, press the [Enter
setting or execute the function. If you press the [Enter
current setting (with asterisk) is highlighted, nothing happens.
6. To back to the previous screen, press the [Paper Select
Product Description
] button when it is
] button to display the
( ) ] buttons and
] button to accept the
] button when the
] button.
Control Panel
Exiting from the Panel Setting Mode
Any one of the following operations returns the printer to "ready for printing"
status.
Press the [Pause] button.
Press the [Paper Select ] button while the top menu is displayed.
When the INITIALIZE SETTINGS in the PRINTER SETUP menu is
executed and finished.
When any one of items in the TEST PRINT menu is executed and finished.
When the BK INK CHANE (changing black ink between Photo black and
Matte black) in the MAINTENANCE menu is executed and finished. (Stylus
Pro 7800 and Stylus Pro 9800 only.)
When the CUTTER REPLACEMENT in the MAINTENANCE menu is
executed and finished.
NOTE: While the printer running or executing the selected function in the Panel
Setting menu, it cannot be returned to the ready status.
Revision B
50