Epson Stylus Pro 7400 Service Manual page 266

EPSON Stylus Pro 7400/7800/9400/9800
5. Cut the cable tie and release the P Edge Sensor harness.
6. Remove the screw that secures the P Edge Sensor and remove it.
One C.B.P. M3 x 6 screw
Set the positioning hole of the P Edge Sensor onto the guide pin.
Figure 4-102.
Disassembly & Assembly
See
P Edge Sensor
Disassembly Procedure
Guide Pins
Figure 4-102. Removing the P Edge Sensor
Revision B
Cable Tie
C.B.P. 3x6
266