Check Alignment - Epson Stylus Pro 7400 Service Manual

Large format color inkjet printer
Hide thumbs Also See for Stylus Pro 7400:
Table of Contents

Advertisement

EPSON Stylus Pro 7400/7800/9400/9800

5.5.2 Check Alignment

This allows you to check the print alignment for each of the three print modes (VSD1,
VSD2, VSD3). If any misalignment symptoms or abnormalities are found on the
printed pattern, a cleaning must be performed.
Paper Used
Size:
24" (Stylus Pro 7400/7800)
44" (Stylus Pro 9400/9800)
Type:
Premium Glossy Photo Paper
Procedure
1.
Turn the printer ON.
2.
Start up the Adjustment Program and select [Check Alignment].
3.
Select the print mode and click the [Print] button to print a alignment check
pattern.
4.
Check the printout pattern for any misalignment symptoms.
5.
When no misalignment symptom is observed, click the [Finish] button to exit
out of the menu.
If misalignment is found on the pattern, perform a cleaning. Then print the
pattern again to check.
Adjustment
Figure 5-99. [Check Alignment] Screen
Horizontal
Alignment
Vertical
Alignment
Figure 5-100. Alignment Check Pattern
Check Results
Revision B
363

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus pro 7800Stylus pro 9800Stylus pro 9400

Table of Contents