Figure 3.10 Operation Window Of Pxe/Iscsi Boot Enable Setting - Fujitsu PRIMEQUEST 2000 Series Tool Reference

UEFI Menu Operations

Change in Enable/Disable settings of PXE/iSCSI boot
The change in PXE/iSCSI boot settings of each network port is implemented by the following procedure.
1. Press "Enter" key placing the cursor on network port for which settings are to be changed.
Pop-up window shown in "FIGURE 3.10 Operation Window of PXE/iSCSI boot Enable Setting"" is displayed.

FIGURE 3.10 Operation Window of PXE/iSCSI boot Enable Setting"

2. Set PXE/iSCSI boot Enable/Disable.
• When PXE boot of UEFI Aware Operating System is set to Enable, [UEFI (PXE/iSCSI)] is selected.
• When PXE boot of Legacy Operation System is set to Enable, [Legacy PXE] is selected.
• When iSCSI boot of Legacy Operation System is set to Enable, [Legacy iSCSI] is selected.
• When PXE/iSCSI boot is set to Disable, [Disabled] is selected.
By default all are [Disabled].
3. Press [Enter] key.
4. To exit from this menu after saving the changes in the settings, select [Commit Changes and Exit] and
press [Enter] key.
5. To exit from this menu without saving the changes in the settings, select [Discard Changes and Exit] and
press [Enter] key.
6. When UEFI (PXE/iSCSI) is selected, to confirm [Enable], [Boot Manager] Menu is activated after reset.
Boot options are added is confirmed as in "FIGURE 3.11 Display of [Boot Manager] Menu".